[REQ] Money printer changes

[Saddam]

1. When using the context menu C thing on a money printer you can open a window that lets you change how long it is in between each print, at the cost of being more easily exploded.

Less time between prints = Increased likelihood of an explosion

2. After print time (and likelihood of explosion) has been decreased enough, printers will ignore FROZEN props.


These options are only available on the mid-range printer because both the homemade and professional printer are too experimental.


I'm suggesting this because Gundealers could keep mid-range printers in the back of their room in a metal box for some small-time printing. Now you have to have a giant warehouse to even get a few prints out of your money printer.

This could make small buildings more attractive to gundealers now that they don't have to get their printer away from EVERYTHING else.

[maddawg]

+1 sounds good

[troll]

-1 I already found a way to easily abuse this by reading over it.

[Moose]

(01-12-2013 11:24 AM)troll Wrote:  -1 I already found a way to easily abuse this by reading over it.

Well how about you point it out to us?

[troll]

(01-12-2013 12:18 PM)Moose Wrote:  

(01-12-2013 11:24 AM)troll Wrote:  -1 I already found a way to easily abuse this by reading over it.

Well how about you point it out to us?

If you could change the rate of the money drop, you can avoid any chance of losing the money by making a printer ejector. So you would just be getting a fukkton of money and you woulden't have to worry about the explosion. So, just keep on getting new printers and your income will be greatly improved without doing any work on the server at all. And this would create a lot more printer camping as well. Sorry if you don't agree with me.

---

No really abuse, but too overpowered.

[Rodrigo 4Ever]

(01-12-2013 10:37 PM)troll Wrote:  

(01-12-2013 12:18 PM)Moose Wrote:  

(01-12-2013 11:24 AM)troll Wrote:  -1 I already found a way to easily abuse this by reading over it.

Well how about you point it out to us?

If you could change the rate of the money drop, you can avoid any chance of losing the money by making a printer ejector. So you would just be getting a fukkton of money and you woulden't have to worry about the explosion. So, just keep on getting new printers and your income will be greatly improved without doing any work on the server at all. And this would create a lot more printer camping as well. Sorry if you don't agree with me.

---

No really abuse, but too overpowered.

That doesn't really helps anything, if you take 5 minutes to print 2000 and your printers catches on fire, or if it takes 1 minutes to print 2000 and it catches on fire, you have got the same amount of profit. Also, you can already make printer ejectors, so I don't see why it would become stupidly abusive.

Saddam didn't say, "MAKE IT PRINT 500 EVERY SECUND AND RAISE THE CHANCE FO EXPLOSION just a littul!!!1!!1111!!!!"

The chances of it exploding would become so stupidly high the faster it would take to print, you'd never want to touch it, And not to mention that there would be a limit on how fast it can print.

[Saddam]

(01-12-2013 10:37 PM)troll Wrote:  

(01-12-2013 12:18 PM)Moose Wrote:  

(01-12-2013 11:24 AM)troll Wrote:  -1 I already found a way to easily abuse this by reading over it.

Well how about you point it out to us?

If you could change the rate of the money drop, you can avoid any chance of losing the money by making a printer ejector. So you would just be getting a fukkton of money and you woulden't have to worry about the explosion. So, just keep on getting new printers and your income will be greatly improved without doing any work on the server at all. And this would create a lot more printer camping as well. Sorry if you don't agree with me.

---

No really abuse, but too overpowered.

Thieves and cops will probably rob you before you get enough money to repay the printer, and they still have a higher chance of explosion when near other printers.

Also, printers are only immune to props after they are printing VERY slowly.


Edit: Rodrigo ninja'd me

[Drakehawke]

the temperature thing didn't move over to GMod 13, your printers aren't affected by props anymore

[maddawg]

(01-20-2013 04:48 PM)Drakehawke Wrote:  the temperature thing didn't move over to GMod 13, your printers aren't affected by props anymore

really? because I swear they explode like immediately if they are in a small room, right next to another printer, or near props.

[Saddam]

(01-20-2013 04:57 PM)maddawg Wrote:  

(01-20-2013 04:48 PM)Drakehawke Wrote:  the temperature thing didn't move over to GMod 13, your printers aren't affected by props anymore

really? because I swear they explode like immediately if they are in a small room, right next to another printer, or near props.

This.

I'll have to get back to printing then.

[Drakehawke]

they're just shit then